Flywheel Adapter Plate Kits

The flywheel adapter plate bolts to the flywheel of the engine. The flywheel adapter plate is available with a rough cut diameter from 12 – 30 in. (305 – 762 mm) and is pre-formed and machined to mate with a hub. Final machining of the outside diameter and drilling of the attaching holes to fit the clutch cover bolt holes in the flywheel must be performed (after purchase) to ensure correct fit.  Additional adapter plates are available for purchase separately.

Flywheel Adapter Kits:

Adapter plate can be drilled with various flywheel patterns, avoid stocking different plates for each engine model tested. Hub is bolted to the flywheel adapter plate to ensure proper location and centering of the driveshaft and has threaded holes for direct attachment of driveshaft cap screws.

Flywheel Adapter Kits 1710-1810 or 1880-1910 include:

  • One 1710-1810 or 1880-1910 Style Hub
  • Two 18 in. (457 mm) diameter Adapter Plate Blanks
  • Two 24 in. (610 mm) diameter Adapter Plate Blanks
  • One 30 in. (762 mm) diameter Adapter Plate Blank
  • One Adapter Plate Hanger Kit

Flywheel Adapter Kit 1550 includes:

  • One 1550 TK Style Hub
  • One 18 in. (457 mm) diameter Adapter Plate Blank
  • One 24 in. (610 mm) diameter Adapter Plate Blank
  • One Adapter Plate Hanger Kit
  • Large or Small Pilot Plates (as required)
Custom Eddy Current Dynamometer Test Stand

Need a Custom Eddy Current Dynamometer Test Stand?

Contact our engineering experts today.